PRONAR 663/4 SILO Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 135

PRONAR 663/4 SILO Скачать руководство пользователя страница 71

SECTION 4

Pronar T663/4 T663/4 SILO

4.5

4.2

HITCHING AND UNHITCHING THE TRAILER FROM

TRACTOR

Ensure that pneumatic, hydraulic and electric connections and the hitch of agricultural tractor

are according to the Manufacturer's requirements, if not the trailer should not be hitched to

the tractor.

In order to hitch the trailer to the tractor perform the actions below in the sequence

presented. Machine must be immobilised by parking brake.

ATTENTION

Trailer may only be hitched to a tractor, which has the appropriate hitch, connection
sockets for braking, hydraulic and electrical systems, and hydraulic oil in both machines
is the same type and may be mixed.

When hitching is completed, secure the electrical leads and hydraulic and braking system
conduits in such a way that they do not become entangled in tractor's moving parts and
are not at the risk of breaking or being severed when making turns.

Hitching to tractor

Immobilise trailer with parking brake.

Pull brake mechanism clockwise until resistance is felt – if trailer is

equipped with standard parking brake.

Position agricultural tractor directly in front of drawbar eye.

Connect the conduits of the shear type support hydraulic system.

The conduits of the shear type support hydraulic system are marked

with information decals (4) i (5) – figure (4.1).

Set the drawbar eye with the aid of the support at such a height that it is

possible to hitch the machine.

Reverse tractor, hitch trailer, check coupling lock protecting machine against

accidental unhitching.

«
...
69
70
71
72
73
...
»

Содержание 663/4 SILO








































































































































Отзывы:

Нет отзывов