Convertible 10 Set-Up Sheet, Handhelp Mount
Place LCD on arm.
Slide beamsplitter frame
onto top plate.
Secure LCD with thumb screw.
1
2
3
Rev: 072508
(Clean beasplitter with included yellow microfiber cloth)
Slide beamsplitter
into beamsplitter
frame.
Place lens through hood
and tighten the drawstring.
Secure teleprompter
to camera with either
thumb screw or socket
cap screw.
Secure beamsplitter frame
with wing nuts.
4
5
6
To accommodate larger cameras the Convertible 10 sled can be flipped upside down so the monitor/beamsplitter
attachment point is on the top level of the sled.
Attach LCD/Beamsplitter assembly
to teleprompter sled.
Adjust height of LCD/beamsplitter
assembly so lens is in the middle.
Tighten thumb screw.
7
