Promise Vess A2600 Скачать руководство пользователя страница 279

Страница: 279 / 365

Important

A recovery disk must be created while the Windows OS is functioning. It is

recommended that the system disk (the mSATA C drive) be backed up on

a regular schedule. The Vess A2000 can be scheduled for regular system

drive backups to the RAID volume. Then, using one of the system recovery

methods (see below), the Windows OS and PROMISE RAID are reinstalled

so that the previously saved system data, including device drivers and VMS

software, can be retrieved from the RAID volume.

Different ways to backup the system disk

There are three options for backing up the system disk, backup to the RAID, to DVD or to a drive

connected via SAN or NAS. Also, it is possible to setup the Vess A2000 to make scheduled backups

to either the RAID or to a network drive.

The recovery procedure installs a minimal operating system and the PROMISE RAID engine. With

these installed, the system disk can be restored to the same state as it existed when saved to the

internal RAID volume, network drive or DVD.

To backup to the RAID volume, it is first necessary to create a Virtual Hard Disk. See

“Virtual hard

disk” on page 275 for details.

273

Product Manual

Windows System Recovery

Содержание Vess A2600













































































































































































































































































































































































Результаты поиска

Содержание Vess A2600

Отзывы:

Бренды по названию

Популярные бренды

Promise Vess A2600, Руководство по эксплуатации продукта

Результаты поиска

Содержание Vess A2600

Отзывы:

Бренды по названию

Популярные бренды