Promise Technology VTRAK M210i Скачать руководство пользователя страница 165

Страница: 165 / 318

Chapter 5: Management with the CLU

151

18. Review logical drive(s) you are about to create for your new array. Then do

one of the following actions:
•

If you agree with the logical drive(s) as specified, highlight

Complete

Disk Array Creation

and press Enter. A note will appear to remind you to

set up LUN mapping for your new logical drive(s). Press any key to
continue.

•

If you specified less than the full capacity for the logical drive in the
previous screen, and you want to add another logical drive now,
highlight

Create New Logical Drive

and press Enter.

•

If you do not agree with the logical drive(s), highlight

Return to Previous

Screen

and press Enter to begin the process again.

Deleting a Disk Array

From the Main Menu, highlight

Disk Array Management

and press Enter.

Highlight the disk array you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.

Highlight

Delete Marked Arrays

and press Enter.

Press Y to confirm the deletion.

Caution

When you delete a disk array, you delete all the logical drives and
the data they contain. Back up all important data before deleting a
disk array.

Содержание VTRAK M210i































































































































































































































































































































Результаты поиска

Содержание VTRAK M210i

Отзывы:

Promise Technology VTRAK M210i, Руководство по эксплуатации продукта, Страница: 165 / 318

Результаты поиска

Содержание VTRAK M210i

Отзывы: