Task 2: Mounting VessJBOD in a Rack
7
Task 2: Mounting VessJBOD in a Rack
The VessJBOD subsystem installs to the rack using the available mounting rails.
You can also use your existing rails.
Cautions
•
At least two persons are required to safely lift, place, and
attach the VessJBOD unit into a rack system.
•
Do not lift or move the VessJBOD unit by the handles, power
supplies or the controller units. Hold the subsystem itself.
•
Do not install the VessJBOD unit into a rack without rails to
support the subsystem.
•
Only a qualified technician who is familiar with the installation
procedure should mount and install the VessJBOD unit.
•
Be sure all switches are OFF before installing the VessJBOD
unit or exchanging components.
•
Mount the rails to the rack using the appropriate screws and
flange nuts, fully tightened, at each end of the rail.
•
Do not load the rails unless they are installed with screws as
instructed.
•
The rails available for the PROMISE VessJBOD unit are
designed to safely support that PROMISE VessJBOD unit
when properly installed. Additional loading on the rails is at
the customer’s risk.
•
PROMISE Technology, Inc. cannot guarantee that the
mounting rails will support your PROMISE VessJBOD unit
unless you install them as instructed.
Note
To lighten the VessJBOD enclosure, remove the power supplies.
Replace the power supplies after the VessJBOD unit is mounted in
your rack.
Содержание VessJBOD 1730
Страница 119: ...手順 1 VessJBOD の開梱 119 図 6 VessJBOD 1830 背面図 LED に関する説明は 130 ページを参照してください I O モジュール 電源装置 外付けファン ...
Страница 138: ...VessJBOD 1000 系列快速啟動指南 138 圖 6 VessJBOD 1830 後視圖 如需 LED 的說明 請參閱第 149 頁 I O 模組 電源供應器 熱抽換風扇 ...
Страница 156: ...VessJBOD 1000 系列快速入门指南 156 图 6 VessJBOD 1830 背面视图 有关 LED 指示灯的描述 请参阅第 167 页 输入 输出模块 电源设备 热交换风 ...
Страница 175: ...작업 1 VessJBOD 포장 풀기 175 그림 6 VessJBOD 1830 후면 모습 LEDs 에 대한 설명은 186 페이지를 참조하십시오 I O 모듈 전원 공급 장치 외부 팬 ...
