Promise Technology Vess J3600 Скачать руководство пользователя страница 93

Страница: 93 / 337

Changing FTP Settings

To change the settings for FTP on the selected NAS share, access the

FTP Settings

menu and configure the

following:

• Enable/Disable: Click the

Enable

box to checkmark the box if you want to enable the FTP protocol. Click

to remove the checkmark to disable the protocol.

• Command Port: Change the port number used for FTP on the NAS share. Default is port 21.

• Client Code Type: Select the language input used for FTP commands.

• Protocol Type: Choose SFTP, Standard FTP, FTP over SSL (Explicit) or FTP over SSL (Implicit, Command

Port 990)

• Maximum Download Rate (KB/s): Use to limit FTP download speed. Default is no limit.

• Maximum Upload Rate (KB/s): Use to limit FTP upload speed. Default is no limit.

Click the

Save

button to change the FTP settings for the NAS share.

FTP Settings

Promise

Technology

Management with WebPAM PROe

Содержание Vess J3600

















































































































































































































































































































































Результаты поиска

Содержание Vess J3600

Отзывы:

Похожие инструкции для Vess J3600

Бренды по названию

Популярные бренды

Promise Technology Vess J3600, Руководство по эксплуатации продукта

Результаты поиска

Содержание Vess J3600

Отзывы:

Похожие инструкции для Vess J3600

Бренды по названию

Популярные бренды