Promise Technology Vess J3600 Скачать руководство пользователя страница 61

Страница: 61 / 337

Controller LED Behavior

The table below describes behavior of the LED indicators on the Vess R3600 Series controller.

Table below refers to Controller LED illustration on previous page

Item # LED

Description

Port Speed (1G I/O and

Management ports)

Flashing amber indicates 100 Mb/s, flashing green indicates 1 Gb/s.

Dark can mean 10 Mb/s or no link (check Link/Activity LED).

Link/Activity (1G I/O and

Management ports)

Solid green light indicates a link.

Flashing green light indicates activity.

SAS Expansion

This lights green when connected, and flash green when there is activity.

BBU

This lights steady green when the battery status is healthy (normal). Red

indicates the battery has failed. A steady amber light indicates there is

not enough reserve power in the battery to backup cache memory if the

power fails.

Dirty Cache

Lights steady amber if cache is dirty, meaning that the controller memory

cache contains data, otherwise this is dark. This will blink green when

using the controller locator feature.

Controller Status

This displays the current operational status of the controller. A steady

(unblinking) green light indicates the controller is operational. This will

blink green when using the controller locator feature. A blinking amber

light indicates a problem. Steady red light indicates controller failure. A

flashing red light means the controller is in Maintenance Mode (offline

while in Maintenance Mode).

10G Port LED Behavior on Vess R3600xi and Vess R3600ti

Model

LED/Description

Vess R3600xi

Two 10 Gb/s SFP+ iSCSI/NAS ports per controller. Two LEDs (Link/Act and Speed) are

located above each port. The left LED lights green when connected, flashes green when

there is activity on the port and remains dark no connection has been established. The

LED on the right of each port indicates connection speed, green indicates 10 Gb/s, amber

indicates 1 Gb/s.

Vess R3600ti

Two 10Gb/s BaseT iSCSI/NAS ports per controller. Two LEDs (Link/Act and Speed) are

located above each port. The left LED lights green when connected, flashes green when

there is activity on the port and remains dark no connection has been established. The

LED on the right of each port indicates connection speed, green indicates 10 Gb/s, amber

indicates 1 Gb/s.

Promise

Technology

Hardware Setup

Содержание Vess J3600

















































































































































































































































































































































Результаты поиска

Содержание Vess J3600

Отзывы:

Похожие инструкции для Vess J3600

Бренды по названию

Популярные бренды

Promise Technology Vess J3600, Руководство по эксплуатации продукта

Результаты поиска

Содержание Vess J3600

Отзывы:

Похожие инструкции для Vess J3600

Бренды по названию

Популярные бренды