Promise Technology Vess A3340 Скачать руководство пользователя страница 68

Страница: 68 / 241

Making Disk Array Settings (CLU)

To make disk array settings:

Main Menu

Disk Array Management

The list of disk arrays appears.

2. Highlight the disk array you want and press the

Enter

3. Make settings changes as required:

•

Enter

, change or delete the alias in the

Alias

field

Maximum of 32 characters (letters, numbers, spaces, and underscores).

•

Media Patrol

– Highlight and press the spacebar to

toggle between enable and disable.

•

PDM

– Highlight and press the spacebar to toggle between enable and disable.

•

Power Management

– Highlight and press the spacebar

to toggle between enable and disable.

4. Press

Control-A

to save your settings.

Notes

You can also enable or disable Media Patrol for the entire RAID system.
Power Management must be enabled on the disk array for the HDD Power Saving

settings to be effective.
Power management is limited to the features your HDDs actually support.

Managing with CLU

Vess A3340 Product Manual

Содержание Vess A3340

















































































































































































































































Результаты поиска

Содержание Vess A3340

Отзывы:

Похожие инструкции для Vess A3340

Бренды по названию

Популярные бренды

Promise Technology Vess A3340, Руководство по эксплуатации продукта

Результаты поиска

Содержание Vess A3340

Отзывы:

Похожие инструкции для Vess A3340

Бренды по названию

Популярные бренды