Promise Technology VES0709, Руководство по эксплуатации продукта

Страница: 53 / 69

40
E
MaiL
s
Ettings
To change Email service settings:
1. Click the Administrative Tools icon.
2. Click the Software Management icon.
3. Click on Email in the Service List of the Service Management menu.
4. Make settings changes as required:
Under
Service Setting -- Email
choose a startup type:
•
Automatic
– (default) Starts and runs with the subsystem.
•
Manual
– You start the service when you need it.
Under
Email Server Settings
• SMTP Server IP address
• SMTP Authentication under
Email Server Settings
The Yes option enables authentication.
The No option disables.
• SMTP Authentication under
Email Server Settings
Username – Required if SMTP authentication is enabled.
SMTP Authentication Password – Required if SMTP authentication is enabled.
Under
Email Content Customization
• Email Sender (From) Address – The sender’s name shown on notification messages.
• Email Subject – The subject line of the notification message.
5. Click the Submit button.
6. Click the Confirm button.
s
EnDing
a t
Est
E
MaiL
M
EssagE
After email settings are completed, you can send a test email.
To send a test email message, complete email settings as described above and check the
Send a test email
option box, then click the Submit button. A test email message is sent to the address you specified.
Managing with the Web Manager Vess A8020 Storage Appliance for Video Surveillance