Promise Technology VES0603 Скачать руководство пользователя страница 85

Страница: 85 / 108

pare

rIveS

When a physical drive in a disk array fails and a spare drive of the same type and adequate capacity is

available, the disk array will begin to rebuild automatically using the spare drive.

In Tree View, click on the Spar Drive icon to see the Spare Drives List, or to create or delete an existing spare

drive. Click on any spare drive in the list to information about the drive. Spare Drive Information includes:

•

Spare Drive ID

•

Physical Drive ID

•

Spare Type

•

Revertible [

Yes/No

]

•

Operational Status

•

Spare Check Status

•

Physical Capacity

• Configurable Capacity

•

Block Size

•

Drive Interface

•

Model

•

Location

• Configuration Status

•

Serial Number

•

Firmware Version

unning

PAre

heCk

A Spare Check verifies the operational status of your spare drives. You can also schedule a Spare Check.

To check a spare drive:

1. Click the Spare Drives icon.

2. Click the Spare Check tab.

3. From the Physical Drive drop-down menu, choose the spare drive you want to check. Or choose All to

check all the spare drives at the same time.

4. Click the

Submit

button.

The results of the Spare Check appear under Spare Check Status in the Information tab. “Healthy” means

normal condition.

Managing with the Web Manager

Vess A7000 Series Storage Appliance for Video Surveillance

Содержание VES0603












































































































Результаты поиска

Содержание VES0603

Отзывы:

Promise Technology VES0603, Руководство по эксплуатации продукта, Страница: 85 / 108

Результаты поиска

Содержание VES0603

Отзывы: