Promise Technology Pegasus32 R4, Руководство по эксплуатации продукта

Страница: 35 / 267

19
Installation and Setup Pegasus32 Product Manual
Installing the Software on your Mac
The Pegasus32 unit ships ready to use without configuration or set-up; however it is a good idea to
install the Pegasus Utility software even if you do not plan to make any changes to device configuration.
The utility is useful for monitoring the system and getting firmware updates.
The utility is necessary if you plan to change the default RAID configuration (Pegasus32 is shipped with
a RAID 5) or if you will swap out any of the hard disks shipped with the device.
The software utility installation package is located on the Pegasus32. Follow the instructions below to
install the utility.
To install the Pegasus32 Software Utility:
1. Double-click on the Pegasus32 icon on your desktop to
view the device contents.
2. Find the file R_PROMISE_Utility_ 40400000x.dmg and double-
click on it to mount the virtual drive containing the installation
software package.
Note that the version number
of the .dmg file and .pkg file
will change as it is updated.
The version number used in
this example is just for the
purpose of illustration.
Note
If you get any warning message during installing driver or software, please refer to
“Troubleshooting” on page 179.