Promise Technology Pegasus R4i Скачать руководство пользователя страница 87

Страница: 87 / 163

Promise

Technology

Pegasus R4i

Creating a Disk Array Manually

This feature creates a disk array only. You can also use the Wizard to create a disk array with logical

drives and spare drives at the same time.

To create a disk array:

1. From the Dashboard menu, click the

Disk Array

link.

2. Click the

Create Disk Array

button.

3. Accept the defaults or make changes:

•

Enter an alias in the

Alias

field

Maximum of 32 characters; letters, numbers, space between characters, and underscore.

•

Enable Media Patrol

– Uncheck to disable on this array.

For more information, see “Media Patrol” on page 51.

•

Enable PDM

– Uncheck to disable on this array.

For more information, see “PDM” on page 57.

Create Disk Array

Содержание Pegasus R4i



































































































































































Результаты поиска

Содержание Pegasus R4i

Отзывы:

Promise Technology Pegasus R4i, Руководство по эксплуатации продукта, Страница: 87 / 163

Результаты поиска

Содержание Pegasus R4i

Отзывы: