Promise Technology Pegasus R4i Скачать руководство пользователя страница 82

Страница: 82 / 163

Managing the Pegasus R4i

Pegasus R4i Product Manual

Running Media Patrol on your Physical Drives

Media Patrol is a routine maintenance procedure that checks the magnetic media on each disk drive.

Media Patrol checks are enabled by default on all disk arrays and spare drives. Media Patrol is

concerned with the media itself, not the data recorded on the media. If Media Patrol encounters a

critical error, it triggers PDM if PDM is enabled on the disk array. Media Patrol checks all physical drives

one at a time.

To run Media Patrol on your physical drives:

1. Click on the

Background Activities

icon.

The list of background activities appears.

2. Mouse-over Media Patrol and click the

Start

button.

Pausing and Resuming a Media Patrol

To pause or resume a Media Patrol:

1. Click on the

Background Activities icon.

The list of background activities appears.

2. Mouse-over Media Patrol and click the

Pause

Resume

button.

Running Media Patrol

Содержание Pegasus R4i



































































































































































Результаты поиска

Содержание Pegasus R4i

Отзывы:

Promise Technology Pegasus R4i, Руководство по эксплуатации продукта, Страница: 82 / 163

Результаты поиска

Содержание Pegasus R4i

Отзывы: