Promise Technology Pegasus R4i Скачать руководство пользователя страница 121

Страница: 121 / 163

110

Promise

Technology

Pegasus R4i

Running PDM on a Logical Drive

Predictive Data Migration (PDM) is the migration of data from the suspect disk drive to a spare drive,

similar to rebuilding a disk array. But unlike rebuilding, PDM automatically copies your data to a spare

drive

before

the drive fails and your logical drive goes Critical.

PDM can be triggered automatically by Media Patrol. See “PDM” on page 57. To run PDM on a

logical drive:

1. Click on the

Background Activities

icon.

The list of background activities appears.

2. Mouse-over PDM and click the

Start

button.

3. Choose a Source Physical Drive.

The Source Physical Drive is the drive suspected of possible failure. Source Physical Drives are

identified by the disk array number and their sequence number in the disk array.

4. Choose a Target Physical Drive.

The Target Physical Drive is the replacement drive.

Target physical drives are identified by their physical drive ID number.

5. Click the

Confirm

button.

Run PDM

Содержание Pegasus R4i



































































































































































Результаты поиска

Содержание Pegasus R4i

Отзывы:

Promise Technology Pegasus R4i, Руководство по эксплуатации продукта, Страница: 121 / 163

Результаты поиска

Содержание Pegasus R4i

Отзывы: