Promise Technology Pegasus R4i Скачать руководство пользователя страница 104

Страница: 104 / 163

Managing the Pegasus R4i

Pegasus R4i Product Manual

Viewing a List of Logical Drives

To view a list of logical drives, do one of the following actions:

•

Click the

Logical Drive

icon.

•

From the Storage menu, choose

Logical Drive

The list of logical drives appears. Logical drive information includes:

•

– LD0, LD1, etc.

•

Alias

– If assigned.

•

Status

(Normal, Critical or Offline icon)

•

Capacity

– Data capacity of the logical drive.

•

RAID Level

– Set when the logical drive was created.

•

Stripe

– Set when the logical drive was created.

•

Cache Policy

– Read cache and Write cache

settings.

•

Array ID

– ID number of the disk array where this

logical drive was created.

Viewing Logical Drive Information

To view logical drive information:

1. Do one of the following actions:

•

Click the

Logical Drive

icon.

•

From the Storage menu, choose

Logical Drive

. The list of logical drives appears.

2. Mouse-over the logical drive you want then click the

View

button.

3. Click the

icon to close the information panel.

Logical Drive list

Содержание Pegasus R4i



































































































































































Результаты поиска

Содержание Pegasus R4i

Отзывы:

Promise Technology Pegasus R4i, Руководство по эксплуатации продукта, Страница: 104 / 163

Результаты поиска

Содержание Pegasus R4i

Отзывы: