Promise Technology Pegasus R4 Скачать руководство пользователя страница 68

Страница: 68 / 148

Pegasus R6, R4 Product Manual

Make setting changes as required:

•

Enter, change, or delete the alias in the Alias field.

Maximum of 32 characters; letters, numbers, space between
characters, and underline.

•

Choose a Read (cache) Policy.

Read Cache, Read Ahead, and No Cache are available.

•

Choose a Write (cache) Policy.

Write Back and Write Through (Thru) are available.

Click the

Save

button.

For more information, see “Cache Policy” on page 98.

Viewing Logical Drive Check Tables

This feature enables you to view error tables. Use this information to evaluate the
integrity of the logical drive and to determine whether corrective action is needed.

To view logical drive check tables:

Do one of the following actions:

•

Click the

Logical Drive

icon.

•

From the Storage menu, choose

Logical Drive

The list of logical drives appears.

Mouse-over and click the logical drive you want then click the

Check Table

button.

Choose an option:

•

All

– All errors. The default choice.

•

Read Check

– Read errors for this logical drive.

•

Write Check

– Write errors for this logical drive.

•

Inconsistent Block

– Inconsistent blocks for this logical drive. Mirror

data for RAID levels 1, 1E and 10 or Parity data for RAID levels 5 and 6.
Identified by the Redundancy Check.

The Check Table lists:

•

Table Type

– Read Check, Write Check or Inconsistent Block.

•

Start Logical Block Address

– LBA of the first block for this entry.

•

Count

– Number of errors or continuous blocks starting from this LBA.

Note

The Write Cache is always set to

WriteThru

when Read Cache is

set to

NoCache

Содержание Pegasus R4





















































































































































Результаты поиска

Содержание Pegasus R4

Отзывы:

Похожие инструкции для Pegasus R4

Бренды по названию

Популярные бренды

Promise Technology Pegasus R4, Руководство по эксплуатации продукта

Результаты поиска

Содержание Pegasus R4

Отзывы:

Похожие инструкции для Pegasus R4

Бренды по названию

Популярные бренды