ProMinent DULCOMARIN 2, Руководство по сборке и эксплуатации, Страница: 10 / 40

3 F module visualisation system
Representation of the operating elements
In the F module visualisation only those operating
elements of the attractions are displayed that are
actually present. This leads to different visualisa‐
tions.
A1260
Fig. 5: F module visualisation system
1. Load the photos of your swimming bath components on to
the SD card of the controller.
ð
Directly in to the root without a sub-folder.
2. Minimum requirements of the photos (JPEG):
n
The aspect ratio (e.g. 16:9 or 3:2) of the photo must cor‐
respond to that of your output equipment (e.g. monitor).
n
The photograph resolution should be high enough to
ensure that it can be output to the output equipment
without any loss of clarity.
n
The reproduction quality cannot be any better that the
quality of the photos that are to be output.
n
The file names are given in table
Ä
Tab. 2 ‘Assignment:
Attraction to file names’ on page 11; the controller can
only find the photo if this naming is used.
F module visualisation system
10