ProMinent DULCO flex DFAa, Руководство по сборке и эксплуатации, Страница: 4 / 32

1 Product identification
1.1 Identity Code for DULCO
® flex DFAa 003
Identity code
DFAa DULCO
®
flex DFAa 003
Type
003 DFAa 003, with 3.2 mm hose, wall thickness 2.4 mm,1.66 ml/revolution
Power end/drive
000 Pump without power end/drive
Reduction gear system / 3 x 230 / 400 VAC
A10 0.12 kW, 14 rpm, 1.4 l/h, 2 bar
A11 0.12 kW, 35 rpm, 3.5 l/h, 2 bar
A12 0.12 kW, 70 rpm, 7.0 l/h, 2 bar
A13 0.18 kW, 93 rpm, 9.3 l/h, 2 bar
A14 0.18 kW, 140 rpm, 13.9 l/h, 2 bar
Manual adjustment gears / 3 x 230 / 400 VAC
A21 0.12 kW, 10.9 ... 57 rpm, 1.1 ... 5.7 l/h, 2 bar
A22 0.25 kW, 34 ... 176 rpm, 3.4 ... 17.5 l/h, 2 bar
Gear motor with integrated frequency converter / 1x 230 VAC
A31 0.18 kW, 13 ... 130 rpm, 1.3 ... 12.9 l/h, 2 bar, 7 ... 70 Hz
Gear motor (external frequency converter required) / 3 x 230 / 400 VAC
A41 0.18 kW, 4 ... 105 rpm, 0.4 ... 10.5 l/h, 2 bar, 3 ... 75 Hz
Hose material
A
Norprene ® A60G
C
Solva ®
D Silicone
Base plate
0 Base plate, lacquered steel
1 Base plate, stainless steel
Batch control
0
No batch control
R With batch control
Special version of motor
0
Standard (3 phase) 3x230/400 VAC
D Single-phase motor, 0.12 kW (only for A10 ... A12) 1x230
VAC
E Single-phase motor, 0.18 kW (only for A13 ... A14) 1x230
VAC
Pump head
0
Standard with one pump head
Product identification
4