Promax RANGER Neo 2, Руководство пользователя

Страница: 274 / 349

Chapter 11: CONNECTING TO EXTERNAL DEVICES 262 October 2021
7 To extract an inserted CAM module, press the button from extractor
mechanism and remove the module. If the equipment detects the CAM
module extraction it shows a confirmation message.
It is an asynchronous serial interface. It is the serial standard used for MPEG-2
TS, in multimedia equipment interconnection:
„
Synchronous 270 Mbps data flow (up to 218 Mbps payload).
„
Differential signal over coax interface.
„
It allows intermediate node test in broadcast and distribution
infrastructures.
The TS-ASI option is a key feature. You can monitor and analyze streams coming
from satellite receivers, transport stream players, multiplexers, etc... It
automatically detects whether the stream is composed of 188 or 204 bytes.
►
Operation
1 Press the Settings key to access the settings.
2 Select the Decoder TS Input option. It shows up a menu to select the
transport stream coming into the equipment between the RF Demodulators,
IPTV and the ASI Input.
3 The RF Demodulators option (this option is available only if RF is selected as
a Signal Source) extracts the TS from the RF signal by means of the internal
RF demodulator. The RF signal can come from digital terrestrial, satellite or
cable.
4 The IPTV option (this option is available only if IPTV is selected as a Signal
Source) extracts the TS from the IPTV signal.
5 The ASI Input option gets the TS directly through the ASI-TS input
connector.
11.8 TS-ASI Port
11.8.1 TS-ASI Input