Promax 10 SE, Руководство пользователя

Страница: 104 / 154

USER’S MANUAL. PROMAX-10 Premium
Page 44 11/2008
4.3 Connection to a Computer or Printer.
The PROMAX-10 Premium permits the connection to a PC or to a serial printer
for data transfer, by means of the connection cable model CC-208 .
Do not connect any cable other than that supplied by the manufacturer,
otherwise serious damage may be caused to the equipment.
1) Prior to connecting the equipment to a PC, disconnect both from their
respective power supplies.
2) Connect the end of the connection cable corresponding to the PROMAX-10
Premium to connection [8] and the other end to the serial port of your
computer or printer.
Once the computer or printer have been connected, select on the PROMAX-10
Premium the LOGGER operation mode. If PRINT function is selected data will be
dumped to the remote unit through the serial port.
The communication parameters used by the PROMAX-10 Premium , and which
therefore must be defined on the remote unit (PC or printer) are the following:
Rate 19200 bauds
Data bits 8 bits
Parity None
Stop bits 1
The remote control software RM-010 (optional accessory) permits to carry out
from a computer the following options:
1) CHANNELS PLAN PROCESSOR: Modify, add or delete channel plans.
2) CONFIGURATION: Permits to modify all the configuration parameters.
3) DATALOGGER: Permits to edit and to save all the measurement contained
in a logger.
4) UPDATE: Allows to update the PROMAX-10 Premium software version.