LED Light Panel
LED120
Thank you for purchasing the PROMASTER
®
LED120 Light Panel.
Please read the following instructions to ensure the best
operation of your light panel.
Installing the Batteries
Remove the battery cover from the back of the light by gently squeezing the two battery door locking tabs.
Insert 4 AA batteries (not included) as shown. Be sure the batteries are inserted with the correct polarity (+,-) as shown in the battery
compartment.
After the batteries are properly installed use the power switch to turn your light panel on or off.
Installing or Removing the Color Correction Filter
Your LED120 light is supplied with a 3300K correction filter that helps give you the best color balance when shooting under ambient
tungsten lighting. This filter is easily installed by snapping over the edge of your LED120 light. To remove, simply lift the filter off.
3300K Filter
LED120 with
filter installed
