PROLiNK PRN3009 Скачать руководство пользователя страница 58

Страница: 58 / 87

PROLiNK® PRN3009

Wireless-N 300 Routers

4.3

Network

On the Advance Network setting, allows the user to change the LAN Settings and WAN Setting. Please

note, this setting is for more technically advanced users, who have sufficient knowledge about LAN

and WAN setting. These settings should not be changed unless you know what effect the changes will

have on router compatibilities.

LAN Setting

IP Address

- The IP address of the device.

Subnet Mask -

Enter the Subnet Mask of the router. By default, the subnet is set to 255.255.255.0.

Default Gateway

- Valid only in Bridge mode,

IP Address

is used in other operation modes.

DHCP Type

Client

will obtain an IP address from DHCP server elsewhere, while on Server will

offer IP addresses for the network.

DHCP Client Range –

Range of IP address provided by the PRN3009 to the client

DHCP Lease Time -

Enter the length of time for the IP address lease in minutes.

Static DHCP -

Enable or Disable Static DHCP functionality

DHCP Domain

- The domain of the IP address offered by the DHCP server.

802.1d Spanning Tree

- A protocol used to detect and separate network loops, forecasting and

avoiding the potential broadcasting storm

MAC Address Clone

- Use a specified MAC address to instead the default one.

Содержание PRN3009
























































































Результаты поиска

Содержание PRN3009

Отзывы:

Бренды по названию

Популярные бренды

PROLiNK PRN3009, Руководство пользователя

Результаты поиска

Содержание PRN3009

Отзывы:

Бренды по названию

Популярные бренды