2.
Carefully turn the hob back over the then
gently lower it into the aperture that you
have cut out.
3.
Adjust the brackets and fully tighten the
to secure the hob into position.
ELECTRICAL CONNECTIONS
Any electrical work required to install this hob should be carried out by a
qualified electrician or competent person in accordance with the local
regulations.
THE HOB MUST BE EARTHED.
Before switching on, make sure the electricity supply voltage is the same as
that indicated on the hob rating label.
Ensure that the hob supply cable does not come into contact with surfaces
with temperatures higher than 50°C.
GAS CONNECTION
This appliance is supplied to run on LPG (Liquefied Petroleum Gas) and NG
(Natural Gas). This appliance must be installed and connected by qualified
persons in accordance with the local gas connection laws and regulations.
9
LPG > NG
NG > LPG
Gas rail
Seal
G1/2” Female coupler
Gas rail
Seal
Ø 11.5 Female coupler
Screws
Bracket
