ERRORS
ERROR SHOWED ON SCREEN
POSSIBLE CAUSES
CODE ERROR
[DMX ACTIVE]
DMX Signal is present when using TRANSFER
CONFIG function
1
[TEMPERATURE ERROR]
TEMPERATURE is out of standard
temperature range use (minus or plus)
2
[BATTERY ERROR]
Recharge the main battery, keeping the
product under charge for some hours.
3
If the error still occurrs, the battery is faulty .
Replace the battery.
4
[NO BATTERY]
Battery not detected. It may be faulty or
disconnected.
5
[LOW BATTERY]
Battery is almost empty (20%). Need to
recharge
6
[BATTERY CHARGER ERROR]
Battery charger circuit not working
7
13 - ERROR MESSAGES
The error is shown on the unit display. In the table below, the "ERROR SHOWED ON SCREEN" column
lists the possible errors, accompanied by a possible cause ("POSSIBLE" CAUSES "column) and a code
error.
PROLIGHTS - SmartBat
PlusG2
32
Содержание SmartBat PlusG2
Страница 43: ......