PROLIGHTS - Ecl
FW
14
9 - MENU STRUCTURE
The following chart describes the MENU tree of the product, the terms shown in
BOLD
indicates the
default settings.
MENU
1 Connect
DMX Address
Value (001-
512)
DMX Mode
UNO
Basic
Standard
Extended
2 Setup
Backlight
On
10 s
20 s
30 s
Allows you to select the timing after that
display will switch automatically off when
unactive.
Flip Display
On
Off
Allows you to rotate the display by 180°.
Disp. Lock
On
Off
Allows you lock the buttons on the control
panel by a password. Press following
combinations (password) in order to access
to the user menu : UP, DOWN, UP, DOWN,
ENTER,
Transfer
Configuration
No DMX Add.
DMX Add.
To transfer the same menu settings of one
fixtures to all the other in the daisy chain,
including or not the dmx address.
Temperature
Unit
°C
°F
To choose the desired unit of temperature
measurement.
3 Advanced
Dimmer Curve Linear
S-Curve
Sqr Law
Inv. Sqr Law
To choose the dimmer curve.
Dimmer
Speed
Auto
Fast
Medium
Slow
To choose the dimmer speed.
Led Frequency
600 Hz
1200 Hz
2000 Hz
4000 Hz
6000 Hz
25 KHz
Select PWM frequency.
Fan Mode
Auto
Silent
Full
Off
Select the product Fan mode.
DMX Lost
Blackout
Hold
Stand Alone
To choose the behaviour of fixture in case
of dmx signal lost.
4 Stand Alone
Master / Slave Master
Slave
Allow you to link and operating in sync
multiple units without a DMX console.
Choose a unit to perform as the Master.
This unit must be the first unit in line; Set
the successive units to be slave.
Preset
Dimmer
Dimmer Fine
Dimmer
Speed
Strobe
To adjust the preset values for the unit.
Содержание EclProfile FW
Страница 31: ...Note...
