ProLights EclNanoPanel TWC, Руководство пользователя

Страница: 24 / 80

Keys Mode Description
MENU + ENTER then power on Clear All Clear all value of fun factory defaul
UP + DOWN after power on Flip Display Directly flip display without enter inside menu
DOWN + ENTER when NO dmx Stand Alone Mode Enter stand alone mode
DOWN on S.A.M. Stand Alone Mode Scroll different stand alone modes (CCT, HSI, etc)
UP on S.A.M. Stand Alone Mode Scroll different stand alone modes (CCT, HSI, etc)
ENTER on S.A.M. Stand Alone Mode Scroll through selected mode parameters (Speed, cct, curve)
SHORT PRESS POWER Stand Alone Mode Open User preset list
UP / DOWN in User preset list
Stand Alone Mode
/ User Preset
Scroll different presets
SHORT PRESS ENTER
Stand Alone Mode
/ User Preset
Recall selected preset
LONG PRESS ENTER
Stand Alone Mode
/ User Preset
Save current values to selected preset
ERRROR SHOWED POSSIBLE CAUSES
[DMX ACTIVE] DMX Signal is present when using TRANSFER CONFIG function
[LED TEMP SENSOR ERROR] LED sensor damaged (open or in short circuit)
[ LED TEMP TOO HIGH] TEMPERATURE is out of standard temperature range use (minus or plus)
[BATTERY ERROR]
Recharge the main battery, keeping the product under charge for some hours.
If the error still occurrs, the battery is faulty . Replace the battery.
[NO BATTERY] Battery not detected. It may be faulty or disconnected.
[LOW BATTERY] Battery is almost empty (20%). Need to recharge
[CHARGING OVERHEAT] Charging overheat, stop charging
[BATTERY CHARGER ERROR] Battery charger circuit not working
[MAINTENANCE TIME] Need to be done standard maintenance and also reset of elapsed time
11 - SHORTCUTS
12 - ERRORS
Parameter PID GET SET Values Description
Default
Value
Calibration 0x830C x x 0-1
0:Off
1:On
1
White Calibration - R 0x82C6 x x 125 - 255 Calibrate level of R ---
White Calibration - G 0x82C7 x x 125 - 255 Calibrate level of G ---
White Calibration - B 0x82C6 x x 125 - 255 Calibrate level of B ---
White Calibration - W 0x82C7 x x 125 - 255 Calibrate level of W ---
IR Setup 0x82BE x x 0-1
0:Off
1:On
1
Run Time 0x82BF x x 0-4
0: 2H
1: 6H
2: 8H
3: 12H
4: 18H
1
Clean All Data 0x82C8 x x 0 - 1 0: No 1: Yes 0
Fixture Hours 0x82C5 x 0 - 65535 Show Fixture Hours ---
Maintenance Period (Alert) 0x82DF x 0 - 300 300
Maintenance Period (Time and Reset) 0x82E0 x x 0 - 300 ---
Power Consumption 0x82DE x Show Power Consumption (W) ---
Battery Cycle 0x82F1 x ---
Battery State (%) 0x82F2 x ---
Battery Life (Min) 0x82F3 x ---
Wireless Quality (%) 0x82F4 x ---
Error Messages 0x82EA x ---
PROLIGHTS - EclNanoPanel
TWC 22