PROLIGHTS - EclNanoPanel
TWC
16
3 ADVANCED
CALIBRATION
ON
Enable/Disable Spektra calibration.
OFF
DIMMER CURVE
LINEAR
Select Dimmer curve.
S-CURVE
SQUARE
LAW
INVERSE
SQUARE LAW
HIGH RES@
LOW
DIMMER SPEED
AUTO
Select Dimmer speed.
FAST
MEDIUM
SLOW
LED
FREQUENCY
600Hz
12 kHz
Select LED PWM frequency.
1200Hz
15 kHz
2000Hz
20 kHz
4000Hz
25 kHz
6000Hz
36 kHz
10 kHz
40 kHz
RUN TIME
2H
Select Run Time of the fixture.
2H: Max power available 30W
6H: Max power available 12W
8H: Max power available 9W
12H: Max power available 6W
18H: Max power available 4W
Run Time is calculated using fixture
RGBW @ Full with Calibration on.
6H
8H
12H
18H
IR SETUP
ON
Enable/Disable IR Remote control.
OFF
DMX FAULT
HOLD
Define the behaviour of fixture in case of
DMX signal lost.
BLACKOUT
STAND
ALONE
EMERGENCY
AC FAULT
NO ACTION
Define the behaviour of fixture in case of
AC/DC signal lost. AC Fault has priority
over DMX Fault.
BLACKOUT
EMERGENCY
OFF
AC MODE
NO ACTION
Define the behaviour of fixture in case of
AC/DC signal presence. AC Mode has
priority over DMX Fault.
BLACKOUT
BATTERY
RECHARGE
AUTO
AUTO: Fixture will charge immediately
in case of no signal at startup.
Fixture will charge after 10mins of
signal present with dimmer @ 0.
Fixture will run over DC Power while
signal present without charging battery.
DISABLE: Recharge disabled, fixture
will run over DC Power without
charging battery.
ENABLE: Recharge forced, fixture will
go blackout and start charging battery
immediately.
DISABLE
ENABLE
TUNGSTEN
EMULATION
ON
Enable/Disable Tungsten emulation.
OFF
INVERT
MAPPING
ON
Rotate Pixel mapper layout.
OFF
FACTORY
RELOAD
STANDARD
ON
Reset the unit to factory default settings.
OFF
USER PRESET
ON
Reset the unit to user preset settings.
OFF