PROLIGHTS - EclNanoPanel
TWC
15
9 - MENU STRUCTURE
The following chart describes the MENU tree of the product, the terms shown in
BOLD
indicates the
default settings.
MENU
1 CONNECT
DMX ADDRESS
FIXTURE
001
-512
Choose DMX Address
ADDRESS
FOLLOW
FIXTURE
001-512
DMX MODE
Refer to DMX Chart section
WIRELESS
WDMX
ON/OFF
ON
Enable/Disable the wireless card.
OFF
WDMX mode
TRANSMITTER
Allows to choose whether to set the wireless on the
Transmitter or Receiver.
WDMX mode is unlocked only if WDMX ON / OFF is ON.
When Transmitter Mode is selected, Standalone
automatically transmit signal if setted in Master DMX /
Master No DMX.
RECEIVER
TX link
ON
TX link unlock when the unit is set as a transmitter..
OFF
TX unlink
ON
Disconnect the transmitter from all receivers.
TX unlink unlocks only if WDMX mode is on transmitter.
OFF
RX reset
ON
Total reset of the receiver.
RX reset unlocks only if WDMX mode is receiver.
OFF
DMX to
WDMX (TX)
ON
Enable/Disable the transmission of the dmx from the
transmitter to the receiver via wdmx.
OFF
WDMX to
DMX (RX)
ON
Enable/Disable the retransmission of the DMX from the
receiver to the other units connected by cable to the re
-
ceiver itself.
OFF
2 SETUP
SCREEN
BACKLIGHT
ON
Allows you to select the timing after that display will
switch automatically off when unactive.
10 s
20 s
30 s
FLIP DISPLAY
ON
Allows you to rotate the display by 180°.
OFF
KEY LOCK
ON
Allows you lock the buttons on the control panel by a
password.
Press following combinations (password) in order to ac
-
cess to the user menu : UP, DOWN, UP, DOWN, ENTER,
OFF
DISPLAY
VALUE
RAW DATA
Choose how to show datas on Stand Alone Modes.
In percentage mode values will be shown as 0-100%.
In Raw Data mode values will be shown as 0-255.
PERCENTAGE
TEMPERATURE
UNIT
°C
Allows you to choose Temperature unit showed in home
screen.
°F
USER SETTINGS
PRESET 1 TO 5 RECALL
User settings allows to store up to 5 different configuration
preset. One preset can also be set as Default, recalled in
the factory reload menu.
SAVE
MOVE
SET AS
DEFAULT
TRANSFER
CONFIGURATION
WITHOU DMX
ADDRESS
To transfer the same menu settings of one fixtures to all
the other in the daisy chain, including or not the dmx ad
-
dress. Transfer configuration also works via WDMX.
WITH DMX
ADDRESS