ProLights ArcPod 48VW, Руководство пользователя

Страница: 13 / 28

PROLIGHTS - ArcPod
48VW 11
DMX ADDRESSING
In order to start controlling the product via DMX, the first step is to select a DMX address, also known
as the start channel, this is the first channel used to receive instructions from a DMX controller. If you
wish to control the product individually, it is necessary to assign a different starting address channel to
each fixture.
The number of channels occupied from the product depends on the DMX mode selected, so always
verify the DMX Mode before start addressing.
If you assign two fixtures the same address, they will be executing the same behaviour. Selecting the
same address to multiple fixtures can be useful for diagnostic purposes and symmetrical control.
DMX addressing is limited to make it impossible to set the DMX address so high that you are left with-
out enough control channels for the product.
Set the fixture’s DMX address by RDM with the DATAMASTER.
7 - RDM FUNCTIONS
The product can communicate using RDM (Remote Device Management) protocol over a DMX512
Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open
standard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting
existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures.
The PIDs in the following tables are supported in the product.
Parameter PID GET SET
DEVICE_INFO 0x0060 x
DEVICE_MODEL_DESCRIPTION 0x0080 x
MANUFACTURER_LABEL 0x0081 x
DEVICE_LABEL 0x0082 x x
FACTORY_DEFAULTS 0x0090 x x
SOFTWARE_VERSION_LABEL 0x00C0 x
DMX_PERSONALITY 0x00E0 x x
DMX_PERSONALITY_DESCRIPTION 0x00E1 x
DMX_START_ADDRESS 0x00F0 x x
DIMMER_INFO 0x00F0
CURVE 0x0343 x x
CURVE_DESCRIPTION 0x0344 x x
SENSOR_VALUE 0x0201 x x
IDENTIFY_DEVICE 0x1000 x
DMX FAULT(0:BLACKOUT,1:HOLD,2:STANDALONE) 0x8200 x x
MASTER/SLAVE (0:MST DMX; 1:MST NO DMX; 2:SLAVE) 0x8201 x x
STAND ALONE MODE (0:EFFECT; 1:STATIC; 2:CCT; 3:MANUAL) 0x8202 x x
EFFECTS (0-9) 0x8203 x x
EFFECT SPEED (0-255) 0x8217 x x
STATIC COLORS (0-2) 0x82C9 x x
WHITE PRESETS (0-9) 0x82CA x x
MANUAL WW(000-255) 0x82CB x x
MANUAL CW(000-255) 0x82CC x x
UNO (0:STATIC; 1:CCT; 2:MANUAL) 0x8211 x x
WH. CAL. WW(000-255) 0x82EC x x
WH. CAL CW(000-255) 0x8209 x x
INVERT MAPPING (0:OFF; 1:ON) 0x8210 x x
CURRENT HOURS(00000-65535) 0x82BE x x
POWER CONSUMPTION(AC 220V) 0x82BF x x
MAINTENANCE TIME(ALERT PERIOD:10-300) 0x82C0 x x
MAINTENANCE TIME(ELAPSED TIME:00-ALERT PERIOD) 0x82C1 x x
ERROR MESSAGES (???) 0x82C2 x x
CLEAN ALL DATA(0:NO,1:YES) 0x82C3 x x