PROLIGHTS - ArcPod
48Q
03
T 45°C
a
Max operating ambient temperature (Ta)
•
Do not operate the fixture if the ambient temperature (Ta) exceeds 45 °C (113 °F).
T -20°C
a
Minimum operating ambient temperature (Ta)
•
Do not operate the fixture if the ambient temperature (Ta) is below -20 °C (-4 °F).
Protection from burns and fire
•
The exterior of the fixture becomes hot during use. Avoid contact by persons and
materials.
•
Ensure that there is free and unobstructed airflow around the fixture.
•
Keep flammable materials well away from the fixture.
• Do not expose the front glass to sunlight or any other strong light source from any an
-
gle. Lenses can focus the sun’s rays inside the fixture, creating a potential fire hazard.
• Do not attempt to bypass thermostatic switches or fuses.
IP66
Permanent Outdoor use
• This product is rated with an IP (Ingress protection) for permanent outdoor use when
used and serviced according to the instruction contained in this document.
•
Never use the fixture in places subject to vibrations or bumps.
•
Make certain that no inflammable liquids, water or metal objects enter the fixture.
•
Excessive dust, smoke fluid, and particle build up degrades performance, causes
overheating and will damage the fixture.
• Damages caused by inadequate cleaning or maintenance are not covered by the
product warranty.
T 80°C
c
Temperature of the external surface
•
The surface of the fixture can reach up to 80 °C (176 °F) during operation. Avoid
contact with people and materials.
Maintenance
•
Warning! Disconnect the fixture from AC mains power and allow to cool for at least
10 minutes before handling.
•
Only technicians who are authorized by PROLIGHTS or Authorised service partners
are permitted to open the fixture.
•
Users may carry out external cleaning, following the warnings and instructions pro-
vided, but any service operation not described in this manual must be referred to a
qualified service technician.
•
Important! Excessive dust, smoke fluid, and particle build up degrades performance,
causes overheating and will damage the fixture. Damages caused by inadequate
cleaning or maintenance is not covered by the product warranty.
Photobiological safety
•
This device emits potentially dangerous optical radiation and is identified in the cat-
egory of Risk Group 1 according to EN 62471.
Do not stare at the operating light source
• Do not look directly at the LED source during operation. It can be harmful to the eyes
and skin.
•
During Installation, operation and maintenance, be prepared for the fixture to light
and move suddenly when connected to power.
Disposal
•
This product is supplied in compliance with European Directive 2012/19/EU – Waste
Electrical and Electronic Equipment (WEEE). To preserve the environment please dis
-
pose/ recycle this product at the end of its life according to the local regulation.
