ProHD BR-DE900 Скачать руководство пользователя страница 48

Страница: 48 / 53

ProHD BR-DE900

HEVC and H.264 Decoding Appliance

User Manual, Version 1.0

Functional Description

Stream Input support:

Video Decoder- HEVC (H.265)

MPEG-H HEVC (ISO/IEC 23008-2) Modes:

•

Profile/Level: up to Main422 [email protected] High Tier

•

Color sampling & bit-depth: up to 4:2:2 / 10 bits

•

Bit Rate: up to 50Mbps

•

Frame Rate: 1-60 fps.

•

Input Resolutions: from CIF up to 1920x1080

Video Decoder- H.264 (HEVC)

MPEG-4 AVC/H.264 (ISO\IEC 14496-10 MPEG-4 AVC -Rec. ITU-T H.264)

•

Profile/Level: up to [email protected]

•

Color sampling / Bit-depth: up to 4:2:2 / 10 bits

•

Bit Rate: up to 100Mbps

•

Frame Rate: 1-60 fps.

•

Input Resolutions: from CIF up to 1920x1080

Audio Decoder

•

MPEG-4 AAC-LC (ISO/IEC 14496-3)

•

Up to 2x stereo channel

•

Sample Rate: 48kHz

•

Bit Rate: 16-192kbs

Network Protocols

•

UDP TS

•

RTP TS

•

RTP ES (RTSP)

•

Zixi™ Error

-Correction (HEVC and H.264)

–

Zixi™ P2P and Broadcaster modes with

stream forwarding feature.

•

RTP TS with ProMPEG Forward Error Correction (SMPTE 2022)

Security

•

Real-time AES decryption for video, audio and metadata

Network Interfaces

•

2x Gigabit Ethernet ports for management and/or streaming

•

DVB-ASI Input and Output

Video Outputs (Rear Panel)

•

1 x 3G/HD-SDI/SD-SDI (SMPTE 259M-C, SMPTE 292M, SMPTE 274M, SMPTE 296M,
SMPTE 424M, SMPTE 425M-A) (12G-SDI activated by firmware update and license
option)

Содержание BR-DE900






















































Результаты поиска

Содержание BR-DE900

Отзывы:

ProHD BR-DE900, Руководство пользователя, Страница: 48 / 53

Результаты поиска

Содержание BR-DE900

Отзывы: