Progress PIX1540X, Руководство пользователя

Страница: 23 / 52

A1
A2
2. To disassemble the filter ( A ), pull apart
( A1 ) and ( A2 ).
3. Remove the filter ( B ).
4. Wash the filters with water.
5.
Before you put the filter ( B ) back, make
sure that there are no residues of food
or soil in or around the edge of the
sump.
6. Make sure that the filter ( B ) is correctly
positioned under the 2 guides ( C ).
7. Assemble the filter ( A ) and put it back
in filter ( B ). Turn it clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and dam-
age to the appliance.
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
Internal cleaning
If you regularly use short duration pro-
grammes, these can leave deposits of
grease and limescale inside the appliance.
To prevent this, we recommend to run long
duration programmes at least 2 times per
month.
TROUBLESHOOTING
The appliance does not start or it stops
during operation.
Before you contact the Service, refer to the
information that follows for a solution to the
problem.
With some problems, the display
shows an alarm code:
•
- The appliance does not fill with wa-
ter.
•
- The appliance does not drain the
water.
•
- The anti-flood device is on.
Warning! Deactivate the appliance
before you do the checks.
Problem Possible solution
You cannot activate the appliance. Make sure that the mains plug is connected to the
mains socket.
Make sure that there is not a damaged fuse in the fuse
box.
The programme does not start. Make sure that the appliance door is closed.
progress 23