Oven func‐
tion
Application
Pizza Setting
To bake pizza. To make in‐
tensive browning and a crispy
bottom.
Moist Baking
This function is designed to
save energy during cooking.
For the cooking instructions
refer to "Hints and tips" chap‐
ter, Moist Baking. The oven
door should be closed during
cooking so that the function is
not interrupted and to ensure
that the oven operates with
the highest energy efficiency
possible. When you use this
function, the temperature in
the cavity may differ from the
set temperature. The residual
heat is used.The heating
power may be reduced. For
general energy saving recom‐
mendations refer to "Energy
Efficiency" chapter, Energy
Saving.This function was
used to comply with the ener‐
gy efficiency class according
to EN 60350-1. When you
use this function the lamp au‐
tomatically turns off after 30
seconds.
Oven func‐
tion
Application
Defrost
To defrost food (vegetables
and fruit). The defrosting time
depends on the amount and
size of the frozen food.
Pyrolysis
To turn on the pyrolytic clean‐
ing of the oven. This function
burns off residual dirt in the
oven.
6.3 Setting a heating function
1. Turn the knob for the heating functions to
select a heating function.
2. Turn the control knob to select the
temperature.
The lamp turns on when the oven operates.
3. To turn off the oven, turn the knob for the
heating functions to the off position.
6.4 Heat-up indicator
When the oven function operates, the bars in
the display appear one by one when the
temperature in the oven increases, and
disappear when it decreases.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock func‐
tion
Application
TIME OF DAY
To show or change the time
of day. You can change the
time of day only when the
oven is off.
DURATION
To set how long the oven
works. Use only when a heat‐
ing function is set.
Clock func‐
tion
Application
END
To set when the oven turns
off. Use only when a heating
function is set.
TIME DELAY
Combination of DURATION
and END function.
ENGLISH 9