
Problem
Possible cause
Remedy
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo"
.
The demo mode is activated.
1. Deactivate the oven.
2. Press and hold the but‐
ton .
3. The first digit on the
display and Demo indi‐
cator start to blink.
4. Enter the code 2468 by
pressing the buttons
or to change the val‐
ues and press to
confirm.
5. The next digit starts to
blink.
6. Demo mode deacti‐
vates when you confirm
the last digit and the
code is correct.
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not remove
the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
13. INSTALLATION
WARNING!
Refer to Safety chapters.
ENGLISH 25