
PN6280_EVB User Manual
Copyright ©
JSC NIIMA PROGRESS and
NAVIA LLC
7
Figure 8
Download key
2.6 Interface Section
2.6.1 UART Interfaces
PN6280_EVB have two UART interfaces: UART0 and UART1. The UART0 is
non-synchronous
communication interface. The UART1 is as the end of the AP module debug interface. When using
UART1, you need to turn switch(17) to the ON state.
PN6280_EVB will be converts the COMS 1.8V level into a standard RS232 level through serial level
converter chip. Users can connect PC or other terminal equipment through UART for serial
communication. UART0 supports 115200 baud rate default. UART1 supports 921600 baud rate
default.
Figure 9 PN6280 UART interface
2.6.2 SIM Card
The PN6280_EVB provide one SIM interface, can automatically identify 1.8V and 3V SIM card.