manualshive.com logo in svg

ProCurve 3500yl Series, Руководство по управлению и настройке, Страница: 306 / 732

Поделиться
Скачать
ProCurve 3500yl Series Скачать руководство пользователя страница 306

12-18

Port Trunking     

Trunk Group Operation Using LACP

Trunk Group Operation Using LACP

The switch can automatically configure a dynamic LACP trunk group or you 
can manually configure a static LACP trunk group. 

N o t e

LACP requires full-duplex (FDx) links of the same media type (10/100Base-T, 
100FX, etc.) and the same speed, and enforces speed and duplex conformance 
across a trunk group. For most installations, ProCurve recommends that you 
leave the port Mode settings at 

Auto

 (the default). LACP also operates with 

Auto-10

, 

Auto-100

, and 

Auto-1000

 (if negotiation selects FDx), and 

10FDx

, 

100FDx

, 

and 

1000FDx

 settings. 

LACP trunk status commands include:

Thus, to display a listing of dynamic LACP trunk ports, you must use the 

show 

lacp

 command.

In most cases, trunks configured for LACP on the switches covered in this guide 
operate as described in table 12-4 on the next page.

Trunk Display Method

Static LACP Trunk

Dynamic LACP Trunk

CLI 

show lacp

 command

Included in listing.

Included in listing.

CLI 

show trunk

 command

Included in listing.

Not included.

Port/Trunk Settings screen in menu interface

Included in listing.

Not included

3500-5400-6200-8200-MCG-Jan08-K_13_01.book  Page 18  Monday, January 28, 2008  10:04 AM

Содержание 3500yl Series





























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов