background image

EN|ENGLISH 

Bench Grinders 

PAE600, PAE900, PAE1050, PAE1250, PAE1350 

INSTRUCTIONS 

Carefully read the instructions before first use of the product. Please keep 

the manual for future use. 

Grinder (hereinafter - sharpener) is designed for sharpening chains, knives, 

scythes, and other household and professional tools. The product is equipped 

with a grinding wheel abrasive wheel, the rotational motion is combined with 

suitable materials allows the best way to handle a necessary tool. The 

product is intended for domestic use, not for commercial use. 

GENERAL SAFETY RULES 

• For every 15 minutes of operation, the device shall be at 15 minutes of rest. 

• The mains power must match the value specified on the nameplate of the 

tool. 

• Repairs should be performed only by qualified personnel at authorized 

service centers. 

• Opening or dismantling the tool terminates the free warranty service 

• Please, before first use of the product, carefully read and follow these 

instructions. It is specially designed for your safety and the safety of others, 

as well as to ensure a long and trouble-free service life of your equipment. 

Warning  

It is strongly recommended not to make any changes in the design of the 

power, or use it for other purposes, as well as the use of any devices or 

accessories other than those recommended in this manual - it may cause 

damage to the tool or injury to the operator.

 

• Use the tool exactly as prescribed  

• Do not use the tool for the job for which it was not designed (for heavy 

work needs a tool designed for the harsh  conditions of work; for the light 

work sufficiently low power tool). Do not use the tool for the purpose for 

which it was not designed. This instrument applies to domestic class and is 

not intended for commercial use. 

Working area 

• Cluttered benches and work areas provoke accidents. Benches should be 

kept in a neat condition. Floors should be clean and free of debris. Special 

precautions should be taken in areas where the floor is slippery due to the 

presence of sawdust or wax. 

Work environment  

Содержание PAE600









Отзывы: