PROCON
®
CANNED MOTOR PUMP 7000
Specification Sheet
Motor Voltage (Frequency)
230/220 (50-60 Hz / 50-60 Hz)
Motor Voltage (Frequency)
230/220 (50-60 Hz / 50-60 Hz)
Capacitor
20
μ
f
Phase
Single
Speed
2880 @ 50 Hz
Power
.5 HP Output Equivalent
(375 Watt)
Motor Insulation Class
B; IPX4
Flow Range @ 50 Hz
46 to 440 lph
Elastomers
Nitrile, EP,
Fluorocarbon, Neoprene
Maximum Inlet Water Temperature *
30°C
Maximum Operating Pressure
13.8 bar
Maximum Relief Valve Pressure
17.2 bar
Maximum Inlet Pressure
6.9 bar
Burst Pressure
68.9 bar
Maximum Dry Suction Lift for Priming with Relief Valve **
2.00 m
Maximum Ambient Air Temperature
42°C
For applications above 42°C consult the factory
Minimum Ambient Air Temperature
4°C
For applications below 4°C consult the factory
Minimum Inlet Water Temperature
0°C Non frozen
For applications below 0°C consult the factory
Porting Configurations
3/8” NPT, G3/8-19 BSPP
Wiring Configuration - Standard
Male Plug Part # AMP 1-480702-0
Socket Part # AMP 350551-1
Female counterpart
Cap Part # AMP 1-480703-0
Pin Part # AMP 350552-1
Wiring Configuration - Alternate
* Temperatures above 30°C have not been evaluated for ETL compliance ** Not recommended for normal operation
PROCON
®
Products
Acragar Road, Mountmellick, Co. Laois
Telephone: 011-353 (502)24350
Email: [email protected]
Republic of Ireland
Fax: 011-353 (502) 24744
Telex: (852) 60019
“QUALITY PRODUCTS – DELIVERED ON TIME”
230 VOLT
GREEN / YELLOW (GROUND)
BLUE (NEUTRAL)
BROWN
BROWN
BLUE (NEUTRAL)
220/230 VOLT
