background image

 

WARRANTY INFORMATION

 

KEEP THIS WARRANTY

 

Model  ___________________________________ 

Serial No.  ________________________________ 

Date Purchased  ___________________________ 

Always specify model and serial numbers when communicating with the factory.

We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard 
written warranty. We make no other warranty, expressed or implied.

 

PRO-COM warrants this product to be free from defects in materials and components for Three (3) years from the date of first 
purchase, provided that the product has been properly installed, operated and maintained in accordance with all applicable 
instructions. To make a claim under this warranty the Bill of Sale or cancelled check must be presented.

 

This warranty is extended only to the original retail purchaser. This warranty covers the cost of part(s) required to restore this 
heater to proper operating condition and an allowance for labor when provided by a PRO-COM Authorized Service Center. 
Warranty part(s) MUST be obtained through authorized dealers of this product and/or PRO-COM who will provide original 
factory replacement parts. Failure to use original factory replacement parts voids this warranty. The heater MUST be installed 
by a qualified installer in accordance with all local codes and instructions furnished with the unit.

 

This warranty does not apply to parts that are not in original condition because of normal wear and tear or parts that fail or 
become damaged as a result of misuse, accidents, lack of proper maintenance or defects caused by improper installation. 
Travel, diagnostic cost, labor, transportation and any and all such other costs related to repairing a defective heater will be the 
responsibility of the owner.

 

TO THE FULL EXTENT ALLOWED BY THE LAW OF THE JURISDICTION THAT GOVERNS THE SALE OF THE 
PRODUCT. THIS EXPRESS WARRANTY EXCLUDES ANY AND ALL OTHER EXPRESSED WARRANTIES AND LIMITS 
THE DURATION OF ANY AND ALL IMPLIED WARRANTIES. INCLUDING WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE TO THREE (3) YEARS ON BURNER SYSTEM AND A LIFETIME ON LOGS 
FROM THE DATE OF FIRST PURCHASE; AND NANJING PRO-COM'S LIABILITY IS HEREBY LIMITED TO THE 
PURCHASE PRICE OF THE PRODUCT AND NANJING PRO-COM SHALL NOT BE LIABLE FOR ANY OTHER DAMAGES 
WHATSOEVER INCLUDING INDIRECT. INCIDENTAL OR CONSEQUENTIAL DAMAGES.

 

Some states do not allow a limitation on how long an implied warranty lasts or an exclusion or limitation of incidental or 
consequential damages, so the above limitation on implied warranties, or exclusion or limitation on damages may not apply to 
you.

 

 

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

 

For information about this warranty write: 

 

LIMITED WARRANTY PRO-COM VENTED GAS LOG SETS

Patent Pending

 

NANJING PRO-COM ELECTRIC APPLIANCE CO., LTD. 

#6 CHUANGYE ROAD, HIGH NEW TECHNOLOGY & DEVELOPMENT ZONE,

GREAT BRIDGE ROAD NORTH, NANJING, 210061, CHINA.

WAL21-01

 

PRO-COM TOLL- FREE NUMBER: 1- 877- 886- 5989 

Содержание WAN18LA

















Отзывы: