Proceq ZRP 6030+, Инструкция по эксплуатации

Страница: 38 / 52

Page 38
13.6 Setup
User
Path: ->
and selecting “Setup”
Select
“User”. Adding a user enables
assigning measurements to a specific
operator and to store user specific settings. If
no user has been added, the default user
„Peter” will be used for each measurement.
The operator is shown at the bottom of the
measuring report.
If a user is selected, all other settings will be
stored for that user. Switching to another
user sets all other settings accordingly.
Language
Path: -
>
and selecting “Setup”
Select
“Language” and choose the desired
language. The current language is marked
with .
If a wrong language has been chosen
accidentally and you cannot find the
language menu, switch off the unit. Press
and hold the measuring button during
start-up to directly access the window for
language selection.
If you want to contribute with a new language
or if you have some comments on an existing
one, please feel free to contact Proceq.