Proceq ZRP 6030+, Инструкция по эксплуатации, Страница: 37 / 52

Page 37
13.4 Timers
Path: -
>
and selec
ting “Timers”
The interval timer can be used for carrying out specific tests, e.g. in product
development. Measurements will be taken continuously until the indicated number
of interval counts has been reached.
The interval timer can be used to define the performance of the retroreflection of a
marking in dependence on the drained water at wet measurements.
Select
“Interval timer” from the menu to
activate the interval timer.
The interval timer takes measurements
continuously at the defined interval up to the
selected count. “Interval time” sets the time
between measurements and can be set from
5 to 1000 seconds
. “Interval counts” sets how
many measurements will be taken. It can be
set to a value from 2 to 500.
If both timers are activated, all current timer
settings are shown. To change these
settings, press the respective line.
13.5 Jobs
Path: ->
and selecting “Jobs”
The ZRP 6030+ offers the possibility to assign measurements to a specific job.
Depending on the type of your company (contractor, road laboratory, manufacturer
of road marking materials) a job could be a specific client, a specific product, a
specific area and so on.
Here it is possible to add a new job or edit,
load or delete an existing one.
If nothing has been changed in this menu,
the job “default” will be indicated in the
measure mode.