Menu
last update: 30.07.2014
page 55
14.5
Jobs
Path:
->
and selecting
“Jobs”
offers the possibility to relate
measurements to a specific job. Depending on the
type of your company (contractor, road laboratory,
manufacturer of road marking materials) a job could
be a specific cli
ent, the development of product “xy”
and so on.
If you do not change anything in this menu, the job
“default” will be indicated in the measure mode.
For deleting a job you need to press the
line “Delete
Job”, choose the job you wish to delete and confirm
the delete message.
14.6
Setup
14.6.1 User
Path:
->
and selecting
“Setup”
To add a user enables relating measurements to a
specific operator and to store user specific settings. If
no user has been added, the
user „Peter” will be used
for each measurement. The operator is shown on the
bottom of the measuring report which can be printed.
If you change any setting at a certain user this will be
stored automatically at the user profile.
E.g. if you have chosen the user profile
„Jim” and you
now set the sound to vo
lume „3” and the language
“French” then these settings will be stored in the user
profile. Then you have another employee “James”
who prefers the sound volume at 4 and the language
“English”. If you switch now between these two users,
all stored information will change accordingly.
