Probotix GX2525, Инструкция по сборке

Страница: 1 / 4

Each Kit will include:
64 – M6 x 12mm Socket Cap Screws
64 – M6 T-nuts
16 – Corner Brackets
8 – M5 x 20mm Socket Cap Screws
5 – M5 Push in T-Nuts
5 – M5 x18mm Socket cap screws
16 – 5/16” - 18 x 1” Socket Cap Screw (24 if castors)
4 – Plastic end caps
8 – 60/60 Adapter plates (4 if castors)
4 – Leveling feet or casters(depending on which option chosen)
1 – MDF Shelf
12 – Aluminum Extrusions per kit. Please see chart below for corresponding sizes.
B
A
C
D
B
B
B
C
D
GX2525 GX3725 GX2550 GX3750
A 4x Legs (6060) 692 692 692 692
B Front/Back (3060) 704 987 704 987
C Top Sides (3060) 832 832 1528 1528
D Bottom Sides (3060) 718 718 1414 1414
All rails are mounted inside the legs flush to the outside, except for the C rails, which
mount to the outside. The B rails are front/back of the machine. The upper rails should
be flush with the top while the lower rails can be adjusted up and down as needed.
FRONT
Extrusion Lengths (mm)
Machine Stand Assembly Guide