8
Make certain that each of the rings are attached as shown.
Locate the rudder and hardware to attach rudder.
Insert the rudder into the hull from the bottom as shown.
Attach the rudder arm onto the rudder as shown. Secure the
rudder with the included screw.
Secure the EZ connector to the pushrod by inserting and
tightening the screw as shown.
Note:
Once the radio system is turned on, it may be necessary
to center the rudder servo. This is done by turning the radio
system on, loosening the EZ connector screw, allowing the
rudder to be re-centered, and re-tightening the screw with the
rudder in that position.
View of radio box with radio system installed
Section 2—Completing the Boat (continued)
32
33
34
35
36
37
