6400 West 105th Street / Bloomington, MN 55438 / www.problemsolversbike.com
THANKS FOR BUYING PROBLEM SOLVERS
MISMATCH 1.2 ADAPTERS!
Thanks for purchasing the Problem Solvers MisMatch Adapter 1.2
®
. We’ve
enjoyed the challenge of mating the latest version of Shimano’s I-Spec
®
levers
(this version calls itself “I-Spec II”) to our beloved SRAM
®
shifters on one elegant
little machined alloy bit. We also make MisMatch Adapters for the previous
Shimano I-Spec A and I-Spec B, check ‘em out on problemsolversbike.com.
WARNING: CYCLING CAN BE DANGEROUS. BICYCLE PRODUCTS SHOULD
BE INSTALLED AND SERVICED BY A PROFESSIONAL MECHANIC. NEVER
MODIFY YOUR BICYCLE OR ACCESSORIES. READ AND FOLLOW ALL PRODUCT
INSTRUCTIONS AND WARNINGS INCLUDING INFORMATION ON THE
MANUFACTURER’S WEBSITE. INSPECT YOUR BICYCLE BEFORE EVERY RIDE.
ALWAYS WEAR A HELMET.
For additional technical and safety information, visit:
www.problemsolversbike.com/safety
COMPATIBILITY/INTENDED USE
MisMatch 1.2 will work with all MatchMaker
™
compatible shifters from SRAM
and I-Spec II Shimano brake levers (model year 2015 and newer).
TOOLS REQUIRED
5mm hex wrench (SRAM shifter removal)
4mm hex wrench
Torque wrench
INSTALLATION:
1. Remove the grips, brake levers and shifters from the handlebars, as well
as the MatchMaker clamp from the SRAM shifter.
2. Open up the Shimano brake lever clamp and remove the spacer (figure 1).
Set that aside for a moment.
3. Attach the MisMatch Adapter to the SRAM shifter (figures 2 & 3) using the
included 8mm bolt and a 4mm hex wrench.
4. Now place the MisMatch Adapter in the clamp of the Shimano brake lever
where you removed the spacer (figure 4).
8457 12/14
MISMATCH 1.2 ADAPTER INSTRUCTIONS
Figure 1
Figure 2
Figure 3
Figure 4
