7. How to Contact ProAVM
For all enquiries write to:-
ProAVM
61 Station Road
Irthlingborough
Northants
NN9 5QE
United Kingdom
Or telephone 01933 650 700 within the UK, +44 1933 650 700 from outside the UK.
Or fax 01933 650 726 within the UK, +44 1933 650 726 from outside the UK.
Or email [email protected] for sales enquiries or [email protected] for technical
support.
Alternatively visit our web site:
http://www.proavm.com
8. Declaration of Conformity
Name of Manufacturer:
ProAVM
Address of Manufacturer:
61 Station Road
Irthlingborough
Northants
NN9 5QE
Product:
DA-ITR4x16 4 Input, 16 Output Versatile Matrix Routing Distribution Amplifier,
Rackmount
Declaration:
The product described above complies with the requirements of the Low Voltage
Directive (73/23/EEC) and the protection requirements of the EMC Directive
(89/336/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Standards:
EN 60065:1993
Safety requirements for mains operated electronic and related apparatus for
household and similar general use
EN 55103-1:1997
Electromagnetic compatibility - Product family standard for audio, video,
audiovisual and entertainment lighting control apparatus for professional use
(emissions - environmental categories E1 to E5)
EN 55103-2:1997
Electromagnetic compatibility - Product family standard for audio, video,
audiovisual and entertainment lighting control apparatus for professional use
(immunity - environmental categories E1 to E5)
9. Warranty
This product is shipped with a 5 year return to base warranty. Please return the product to the company
that you bought it from.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying,
recording or information storage and retrieval systems, for any purpose other than the purchaser's personal use, without the express
written permission of ProAVM.
Information in this document is subject to change without notice and does not represent a commitment on the part of ProAVM. ProAVM
shall not be liable for any direct, indirect, consequential or incidental damages as a result of the use or misuse of this equipment,
handbook or any related materials.
DA-ITR4x16 4 Input, 16 Output Versatile Matrix Routing
Distribution Amplifier, Rackmount
V1.00 © ProAVM 2006
1. Introduction
The ProAVM DA-ITR4x16is a versatile, user-configurable distribution amplifier combining four inputs,
sixteen outputs and a flexible routing system in a 1U high package. Each output may be assigned to
follow any of the inputs or one of two internal mix busses which carry a user-defined combination of
the input signals.
Standard configurations as well as more unusual situations are therefore handled with ease. The extra
pair of inputs allows dual stereo operation with the additional advantage that the user can choose
exactly how many outputs are assigned to each source. The electronically balanced inputs and outputs
may be individually unbalanced, with each output totally unaffected by the settings or load on any
other. Inputs have individual front panel gain controls, and drive “audio present” indicators for at-a-
glance monitoring of signal status.
The DA-ITR4x16 is packaged in a novel 1U case with moveable rack ears which allow the unit to be
mounted with the connectors facing either direction within a 19 inch rack; alternatively, the ears may
be rotated through 90 degrees for screw-down or screw-under mounting.
2. Safety & Electrical Hazard
This unit contains high voltages which could be fatal. YOU MUST ALWAYS ISOLATE THE UNIT FROM
THE MAINS SUPPLY BY COMPLETELY DISCONNECTING IT BEFORE ATTEMPTING TO OPEN THE CASE.
THIS EQUIPMENT MUST BE EARTHED.
Do not expose this equipment to rain or any other source of water.
In common with all mains operated equipment, only suitably trained competent personnel should
attempt to adjust, modify or repair this equipment or operate it with the cover removed. In case of
query please contact your local agent or ProAVM. Any unauthorised adjustment, modification or repair
of this equipment may invalidate any warranty and/or safety approvals that apply.
Please read all of this manual and familiarise yourself with the controls before attempting to use this
equipment. To ensure safety, it is the responsibility of the user to install and operate this equipment in a
manner that is within the manufacturers specifications.
3. Unpacking The Equipment
This package should contain, in addition to this manual:
1 x
DA-ITR4x16
1 x
IEC Mains lead
If any items are missing or damaged please inform your supplier immediately.
Ensure that the DA-ITR4x16 has been supplied for the correct mains/line voltage for your country.
4. Controls and Connectors