DIGITAL THERMO HYGROMETER
PSG08485
Setting the clock
•
Press and hold MODE until you hear a bleep and the minute digit starts to flash.
•
Press ADJ to set the minutes then press MODE and the hours digit starts to flash.
•
Press ADJ to set the hour then press MODE to set 12 or 24 hour display.
•
Repeat this sequence to set the date.
Setting the Alarm
• In normal clock function press MODE and the clock display will freeze and you will
hear a bleep.
•
Press ADJ to switch the alarm function on or off. Press repeatedly to switch to one off
alarm or to select the hourly alarm function.
•
Press and hold MODE and you will hear a bleep and the minute digit starts to flash.
•
Press ADJ to set the minutes then press MODE and the hours digit starts to flash.
•
Press ADJ to set the hour then press MODE to return to normal clock display.
•
When the alarm sounds it will do so for one minute or press any button to silence it.
•
If you selected the hourly alarm it sounds again for a short time every hour following.
IMPORTANT SAFETY INFORMATION
OPERATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
•
If the display fades or becomes unstable thebattery may need replacing.
•
Remove the battery cover by sliding it downwards and replace the AAA battery
noting the polarity. Do not use rechargeable batteries.
