Assembling the GH30C
When you first unbox the GH30C you will find its parts in a disassembled state in the included bag
making it as compact as possible for storage and travel. Begin by removing all 4 components
which include the: main body of the GH30, Platform (5), Smooth Control Handle (9), and Quick
Release Plate (15).
Set the QR Plate (15) aside for now. Connecting the plate is explained in the next section of this
manual.
Take ahold of the Platform (5) and loosen its Platform Knob (4). Now slide the Platform (5) onto
the Arm (2) so it appears like Figures 1 and 2. The Platform (5) will reach a stopping point at the
bottom of the Arm (2). Now tighten the Platform Knob (4) to hold it in place.
Locate the Smooth-control Handle (9). The use of this handle is optional. The Smooth-control
Handle (9) offers greater leverage and control over your camera rig and can be especially useful
when taking video footage. To attach the Smooth-control Handle (9) loosen the Arm Tension
Control Knob (1) and rotate the Arm (2) and Platform (5) about 90 degrees upward so the bottom
of the Platform (5) is facing you while the Arm (2) is to your left. Notice the connection port in the
bottom of the Platform (5) directly on the underside of the Quick Release Receiver (6). Attach the
Smooth-control Handle (9) to this area and use the Smooth-control Handle Attachment Knob (10)
to tighten it in place. Notice the Smooth-control Handle (9) can be attached in a variety of phase
positions. Begin with a position similar to that shown in Figure 1. As you become proficient you
may choose to place it in a different position, depending on your rig and the desired movement.
Once the handle is attached, return the Arm (2) and Platform (5) to its normal resting position as
shown in Figure 1.
Now mount the GH30C to your tripod, or other mounting base, as you would a typical
photographic head. Be sure it is attached firmly and all grub screws (where applicable) on your
tripod are properly tightened.
Attaching Your Camera, Lens, or Rig to the GH30C
Attach the Quick Release Plate (15) to the tripod port on the bottom of your camera, video camera
or lens. In most cases you will use the Small Mounting Bolt (18) which is a ¼”-20 type thread.
However, the Large Mounting Bolt (17) may be necessary with some gear. It has a 3/8”-16 thread.
