Pro Mach ORION Sentry HP, Руководство пользователя

Страница: 23 / 100

Orion Machine Manual
Revision 3.1 Sentry HP/ LP Flex Stretchwrapper
21 May 2020 Introduction and Safety
Page 1-13
Inspection
1. Remove all packing and supporting additions - these may include the blocks under the
carriage and the restraining bar over the table.
Note:
When removing the stretchwrap film covering the machine, care
must be taken not to cut any of the electrical wires and/ or polyure-
thane covering on the film carriage rollers.
2. Perform a visual inspection of the electrical and mechanical parts for loosened joints
and / or broken connections. Any suspected shipping damage must be reported imme-
diately to the freight carrier. Any transport damage cannot be claimed to Orion Pack-
aging Inc.
Items that are vulnerable to damage and must be inspected are as follows:
• Motors and transmissions
• Junction boxes
• Electrical conduits
• Proximity and limit switches
• Photocells
3. Check around the tower to ensure that there is no crippling of the movable parts i.e.
casters, center axle or drive assembly.
4. Verify the following:
• Check wires and conduits for crushed sections or loose fittings.
• Verify the film carriage to be sure that it is correctly aligned with the tower
• Verify all there is no damage to the HMI and all buttons are in tact.
• Use the panel access keys to open the panel or motor access doors. The Panel Access
Key part # is 735586.
Figure 1 - 5
Panel Access Key