WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
60310
HIGH BACK ECO LEATHER CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat, remove pressure from seat and pull lever (1) up.
To lower seat, sit on chair and pull lever (1) up.
NOTE:
It is normal for chair to slightly lower under body weight.
• MID-PIVOT KNEE TILT ADJUSTMENT
To adjust tilt angle, pull lever (2) up for free float, and push
lever (2) down to lock into any postition.
• TILT TENSION ADJUSTMENT
To adjust tilt tension, turn knob (3) counter-clockwise to
increase tension, and turn knob (3) clockwise to decrease
or ease tension.
NOTE:
Be careful not to loosen back tilt adjustment knob completely.
1
3
2
© Office Star Products novembre 2014
60310
FAUTEUIL DE DIRECTION EN CUIR
ÉCOLOGIQUE À DOSSIER HAUT
INSTRUCTIONS DE MONTAGE
ÉTAPE 1
2
3
5
4
10
8L
12
7
6
1
11
9
ÉTAPE 2
ÉTAPE 3
ÉTAPE 4
6
3
9
6
8R
7
PROLINE II LIMITED WARRANTY
ProLine II chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs.
or less. The 54666 is for persons weighing 300 lbs. or less. The 7103M, 7602R, 7605R, 7600R, 81108, 81308 & 81608 are for persons weighing 400 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state
.
All ProLine II chairs meet or exceed ANSI BIFMA standards.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités
des pièces sont correctes.
ÉTAPE 1
Insérer les cinq Roulettes (2) dans la Base (1). Pousser fermement jusqu’à ce que les Roulettes (2) s’encliquettent. Insérer le Vérin
pneumatique (3) dans la Base (1). Glisser le Soufflet (4) sur le Vérin pneumatique (3).
ÉTAPE 2
Fixer le Support du dossier (12) au Coussin du siège (6) à l’aide quatre Vis courtes (9).
SERREZ TOUTES LES VIS AVEC LA CLÉ
ALLEN (13).
ÉTAPE 3
Fixez le Mécanisme (5) à Coussin de siège (6) avec la flèche vers l’avant de la chaise avec quatre Vis courtes (9).
SERREZ TOUTES
LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 4
Fixer les Bras (8L et 8R) au Coussin du siège (6) et Coussin du dossier (7) avec deux Vis longues (10) pour chaque Bras (8).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
Recouvrez les trous dans les Bras (8L et 8R) avec quatre Bouchons en plastique (11)
pour chaque Bras (8).
Placer le siège assemblé sur le Vérin pneumatique (3) et mettre de la pression vers le bas.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ
COMPLÈTEMENT TOUTES LES VIS.
PIÈCE QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Roulettes . . . . . . . . . . . . . . . . . . . . 5
3.
Vérin pneumatique . . . . . . . . . . . . 1
4.
Souflett . . . . . . . . . . . . . . . . . . . . . 1
5.
Mécanisme . . . . . . . . . . . . . . . . . . 1
6.
Coussin du siège . . . . . . . . . . . . . . 1
7.
Coussin du dossier . . . . . . . . . . . . 1
8.
Bras (8L et 8R) . . . . . . . . . . . . . . . 2
9.
Vis courte . . . . . . . . . . . . . . . . . . . . 8
10.
Vis longue . . . . . . . . . . . . . . . . . . 4
11.
Bouchons en plastique . . . . . . . . 4
12.
Support du dossier (pré installé) . 1
13.
Clé Allen (non montré) . . . . . . . . . 1
